Denver, CO | info@imperiumarms.com | (720) 507 - 4867

GENERAL REPAIR PRICING

All Timeline’s given are estimates and NOT Guaranteed

 

Scope Mounting: 7-10 Days

Professional Boresighting  $15.00

Professional Scope Mounting and Boresighting  $30.00

 

Rifle Services: 2-3 Weeks

General Labor Rates

Inspect firearm and prepare written quote  $40.00

Minimum charge  $40.00

Labor half hour  $55.00

Labor one hour  $110.00

General Rifle Service

Complete clean, disassemble, safety check, oil and reassemble (rust removal and or excessively dirty firearms are additional)

    Bolt Actions, Pumps, Levers & Auto rifles  $90.00

    Double Rifles & Drillings  $160.00

Check headspace  $60.00

Lap barrel lugs  $130.00

Cut and crown average barrel (sight work additional)  $100.00

Recrown only  $75.00

Drill & Tap (per hole)  $35.00

Zero in rifle at range, ammo not included  $130.00

Glass bed finished rifle, starting at  $100.00

Install aluminum pillars and glass bed  $190.00

Inlet & glass bed semi-inlet stock  $100.00/hr

Dovetail for open sights (per cut)  $85.00

Dovetail front and rear same set up  $135.00

Trigger work on request (starting price)  $80.00

Rechamber most rifles (bolt, extractor & feeding work additional) starting at  $180.00
 

AR-15 Service

Complete disassemble, clean, safety check, oil and reassemble  $150.00

Completely assemble a lower from parts kit  $80.00

Install custom triggers from makers like Rock River, Geissele, JP Ent., Chip McCormick, Jewell, etc.  $80.00/hr

Thread barrel for brake or flash hider  $100.00

Custom sights available from Trijicon, Aimpoint, JP Ent and many more

Price on Request

Install accessory handrail, forend, or free float tubes, many variations

Price on Request

Custom grips available from Hoge, MAGPUL, Command Arms and many more

Price on Request

Rifle Rebarreling: 4-6 Weeks

Custom barrel installation package (includes complete cleaning, squaring bolt face and receiver, lapping the locking lugs, threading, chambering and headspacing, standard throating, crown of your choice)  $450.00 plus cost of barrel
Up-charge for single shot rifles like Ruger No.1 $100.00

Up-charge for Win 70 pre 64, Springfields & Enfields (Extractor cut)  $100.00

Inlet your stock for new barrel  $160.00

Custom Trigger Service: 7-10 Days

Polish Factory trigger to best possible result  $130.00

Install aftermarket Trigger, tune and polish  Trigger Price Plus $90.00

Shotgun Service: 2-3 Weeks

General Labor Rate

Inspect firearm and prepare written quote  $40.00

Minimum charge  $40.00

Labor half hour  $55.00

Labor one hour  $110.00

General Shotgun Service

Complete Clean, disassemble, safety check, oil and reassemble (rust removal and or excessively dirty firearms are additional)

       Most pumps & Autos  $90.00

       Win 97, Rem 11’s, Brwn auto-5's and similar models  $110.00

       Doubles & O/U’s  $160.00

       High grade Doubles & O/U’s with sidelocks  $225.00

Cut, crown and reset bead (New Bead additional)  $110.00

Cut and crown only on single barrels  $70.00

Cut and crown O/U or SxS  $120.00

Drill and tap for sight bead (one)  $35.00

Drill and tap for sight beads (two, same set up)  $70.00

Remove dents and straighten barrels at customer risk (please bring in for quote)  Price on Request

 

Muzzleloader Service: 2-3 Weeks

Half hour labor rate  $55.00

Hourly labor rate  $110.00

Inspect firearm and prepare written quote  $40.00

Professional scope mounting and boresighting  $30.00

Complete disassemble, clean, inspect, oil, reassemble, and safety check  $90.00

Revolver Service: 2-3 Weeks

General Work 

Hourly labor rate  $110.00

Inspect firearm and prepare written quote  $40.00

Professional boresighting  $15.00

Complete disassemble, clean, inspect, oil, reassemble, and safety check  $110.00

1911 Service: 2-3 Weeks

General Labor Rates

Inspect firearm and prepare written quote  $40.00

Minimum charge  $40.00

Labor Half Hour  $55.00

Labor One Hour  $110.00

Custom 1911 work  Price and Packages upon Request.

 

Recoil Reduction:

Choice of Brake + Labor

$100.00 + Cost of Brake

 

Accurizing: 3-4 Weeks 

Glass Bedding

A perfect wood-to-metal fit on bolt actions is important. A poor fit will allow the action to move in the stock while firing, resulting in poor accuracy. A proper bedding job will minimize this movement and remove the stress on the action caused by a poor fit. Using a two part epoxy bedding compound, we can perfectly fit the stock to the action. We also freefloat the barrel as part of the bedding service. Freefloating insures that the barrel has no contact with the stock. This keeps your shots from walking or stringing when the barrel heats up and expands. Some barrels may shoot better with a pressure point. See our in-store Gunsmiths for the application that best suits your firearm.

Glass bedding and freefloating bolt action rifles  $140.00

Pillar Bedding

 

Achieves the same result as glass bedding, but gives you the additional stability of aluminum pillars installed around the actions screws between the action and the bottom metal.  $190.00

 

Muzzle Crown

The crown is the very front of a rifle barrel and the point at which the bullet exits. If the crown is damaged, worn, or uneven, bullet flight can be adversely affected. There are many types and styles of barrel crowns and all are equally accurate. The quality of the crown is more important than its shape. The last thing the bullet contacts is the crown and you want to be sure it exits the muzzle without interference.

Cut and crown average barrel (sight work additional)  $100.00

Recrown only  $60.00

All Gunsmithing Warrantied for 6 months from date of pickup against workmanship defects.   Any firearm found to be loaded without having been expressed will be subject to a $50 live firearm hazard fee.   All timelines given are estimates and NOT Guaranteed.   All Custom builds warrantied for life against workmanship defects.   Warranties do not include normal wear and tear, negligence or damage not related to workmanship.